STEEL-CRAFT | THERM-O-DOR
Steel-Craft Therm-O-Dor garage doors from Garage One deliver top insulation and durability for homes in Mississauga & Southern Ontario, with expert installation and repair services for year-round performance.
Colours
Steel-Craft’s Therm-O-Dor overhead doors are manufactured from top-quality, Canadian-made steel, designed from the inside out to ensure maximum strength. Featuring a patented mechanical interlock design and heavy-duty hardware, these doors offer superior durability and protection against break-ins. All doors are corrosion-resistant, treated with a zinc base coating and two polyester topcoats, making the exteriors paintable, fade-resistant, and easy to clean.
TD 138 Model: 1-3/8" polyurethane insulation layer, R-value of 12.60, offering twice the efficiency of competitors’ polystyrene panels.
TD 134 Model: 1-3/4" polyurethane insulation layer, R-value of 16.04, also twice the efficiency of competitors’ polystyrene panels.
Features
- Flexible top seal to keep out cold and debris
- Section weather seals to prevent wind and cold infiltration
- PVC retainer enhances door rigidity
- High-quality Canadian galvanized steel, durable and rust-resistant
- Two-coat exterior polyester paint finish for durability
- Therm-O-Break design reduces conductivity of cold, heat, and moisture
- Mechanically interlocked front and back skins increase strength
- TD 134: CFC- and HCFC-free polyurethane core, R-value of 16.04
- TD 138: CFC- and HCFC-free polyurethane core, R-value of 12.60
- Continuous steel overlap secures hardware attachments
- Flexible floor seal conforms to minor irregularities to keep out cold and debris
- Insulated windows with sealed lites and high-impact polymer frames
- Heavy-duty rollers and hardware for easy installation
TD 138 Optional Features
| Category | Feature | Description |
|---|---|---|
| End Stiles | Single End | Single end stile |
| Hinges | 14ga Single End | 14-gauge single end hinge |
| 11ga Single End* | 11-gauge single end hinge | |
| 14ga Intermediate | 14-gauge intermediate hinge | |
| Track Rollers | 2" 10 Ball Short Stem | 2-inch 10-ball short stem roller |
| 3" 10 Ball Short Stem | 3-inch 10-ball short stem roller | |
| 2" 10 Ball Long Stem* | 2-inch 10-ball long stem roller | |
| 3" 10 Ball Long Stem* | 3-inch 10-ball long stem roller | |
| Specialty Track Rollers Long Stem | 2" Nylon Sealed Bearing* | 2-inch nylon sealed bearing |
| 3" UHMW Sealed Bearing* | 3-inch UHMW sealed bearing | |
| 3" Rubber Sealed Bearing* | 3-inch rubber sealed bearing | |
| 3" Nylon Stainless Shaft* | 3-inch nylon with stainless shaft | |
| Top Fixture | Standard Duty Single | Standard duty single top fixture |
| Bottom Corner Brackets | Standard Duty | Standard duty corner brackets |
| Locks | Sidelock | Standard sideload lock |
| Interior Barlock* | Interior barlock | |
| Exterior Keyed Barlock* | Exterior keyed barlock |
TD 134 Optional Features
| Category | Feature | Description |
|---|---|---|
| End Stiles | Single End | Single end stiles available |
| Double End 17'w+ | Double end for doors over 17' width | |
| Hinges | 14ga Single End | 14-gauge single-end hinge |
| 11ga Single End* | 11-gauge single-end hinge | |
| 14ga Double End 17'w+ | Double end for 17' width and above | |
| 11ga Double End 1000lbs | Double end hinge rated to 1000lbs | |
| 14ga Intermediate | 14-gauge intermediate hinge | |
| Track Rollers | 2" 10 Ball Short Stem | 2-inch 10-ball short stem roller |
| 3" 10 Ball Short Stem | 3-inch 10-ball short stem roller | |
| 2" 10 Ball Long Stem | 2-inch 10-ball long stem roller | |
| 3" 10 Ball Long Stem | 3-inch 10-ball long stem roller |
Guide and Lift Options
| Feature | Description |
|---|---|
| High Lift | Track and hardware to raise door vertically above top of door opening before leveling horizontally. |
| Vertical Lift | Track and hardware allowing vertical door opening without horizontal tracks. |
| Low Lift Double Track | Low headroom accessories for operation in minimal headroom. |
| Full Angle Mount | Available in Continuous and Reverse (1" overlap). |
| Torsion Spring Assembly | Extensive cycle options available to meet all specifications. |
| Torsion Shaft | Available in 1" solid where 1" tube is specified. |
| End Bracket | 2-bolt flange bearing, available in 1" and 1-1/4". |